Package:    250 Kg.                                       25 Kg.
ABZOL® Cleaners
n-propyl bromide, 1- bromopropane, nPB

 

ABZOL® cleaners are high-performance precision cleaning solvents for vapor degreasing, cold cleaning and ultrasonic cleaning, but with some very important differences from the chlorocarbons, hydrochlorocarbons and chlorofluorocarbons you may be using now.

They offer very low Ozone Depletion Potential (ODP) and very low Global Warming Potential (GWP). They have no flash point by either the tag closed cup or open cup methods, and they’re easy to recycle, compatible with metals, and less likely to cause corrosion than some other solvents.

 

ABZOL® JG is a bromine based cleaning agent that Albemarle has developed uniquely. It also has steam cleaning properties that are comparable to chlorine solvents such as methylene chloride. Trichlorethylene, etc. In addition, with special properties such as non-flammable and quick drying This makes it a highly efficient, safe and environmentally friendly solvent as well as degreasing the processed metal parts. Electronic components Parts that require high resolution Including ceramics, glass as well.

 

Recommended Contaminants: Adhesive, Buffing/Polishing Compounds, Carbon Deposits, Coatings, Cutting/Tapping Fluids, Fluxes, Greases, Inks, Lubricating/Lapping Oils, Mold Releases, Oil, Resins/Rosins, Waxes
 
Recommended Equipment: Cold Solvent, High Pressure Spray, Immersion/Soak, Low Pressure Spray, Manual Wipe, Ultrasonics, Vapor Degreasing
• Outstanding solvency and cleaning • Fast drying • Excellent penetration into crevices
• Compatible with most vapor degreasers • Environmentally responsible • Low evaporative emissions
• Very low acid formation • Can be distilled and recovered • Not regulated as flammable by DOT
• Not subject to regulation

under SARA 313, NESHAP, HAP, RCRA

 • Safe to use with proper worker protection

and adequate ventilation

ABZOL CLEANERS ARE IDEAL SOLVENTS FOR:

• Precision metal parts • Circuit boards
• Electronic components • Optical equipment
• Implantable prosthetic devices • PU foam nozzles
• Etc.

MATERIALS COMPATIBILITY

Test Method: MIL – T – 81533A

METAL

• Carbon Steel 1010 • Stainless Steel 316L • Copper
• Copper • Brass • Zinc
• Nickel • Titanium • Aluminum
• Monel • Magnesium • Inconel

 

PLASTIC AND ELASTOMER

• Polyacetal(Delrin) • Polyflorinated Vinylidene(Kyner> • Polyamide(Nylon6) • Phenolic resin
• Poly tetrafluoro ethylene(Teflon) • Tefzel • Florinated Rubber(Viton-B, Kalretz) • Glass reinforced epoxy(Acculam)
• HDPE(Alathon) • PP • Polyester • Urethane Rubber(Adiprene)
• Poly tetraflooro ethylene(Aflas) • Nitrile-Butadiene Rubber(Bunna-N) • Chloroprene Rubber(Neoprene)

*Warning : The result carried out by standard method test. However, customer should conduct by yourself.

 

BASIC INFO ABZOL® JG VS OTHER SOLVENT CLEANERS

คุณสมบัติ ABZOL® JG ไตรคลอโรเอทิลีน เมทิลีนคลอไรด์ HCFC-225
สูตรทางวิทยาศาสตร์ C3H7Br C2HCl3 CH2Cl2 C3HCl2F5
มวลโมเลกุล 123 131 85 203
จุดเดือด(°C) 71 87 40 54
Specific gravity
(25/25 °C)		 1.35 1.46 1.33 1.55
Viscosity (cP) 0.49 0.54 0.43 0.59
Vapor pressure (20 °C,
mmHg)		 111 58 349 283
Specific heat (cal/g) 0.27 0.22 0.28 0.24
Latent heat of vaporization
(cal/g)		 58.8 57.2 78.7 34.6
Surface tension (mN/m) 25.9 26.4 28.2 (25 oC) 16.2
Solubility into water
(g/100g)		 0.25 0.11 1.32 0.033
Water solubility
(g/100g)		 0.05 0.03 0.20 0.03
KB value 125 129 136 31
Flashing point (°C) No No No No
Combustible range
(vol%)		 3-8 9-45 14-22 ไม่มี
Acceptable concentration (ppm) 0.5*1 25*1 50*1 100*2

** Reference: Albemarle Corporation’s work environment standards (AWEG/8-hour weighted mean TWA